## Why do we put giant rocks in culverts?

Just to mirror the other two answers, it’s very common for engineers to specify that ditches be lined with riprap

## Measurement or Computation of Runoff- Runoff Calculation

You know that runoff is the stormwater that flows through the surface of the earth to a reservoir or dam.

## What is water resource engineering?

What is water resource engineering? Water resources engineering was introduced by the central government to encourage students to persue their

## What is Unit Hydrograph in Water Resource Engineering

The unit hydrograph of a watershed is defined as a direct runoff hydrograph resulting from 1 unit of excess rainfall

## Importance of Hydrology in Civil Engineering

Importance of Hydrology in Civil Engineering Critically important! As a civil engineer, I’m always analyzing how storm water will flow

## 10 Factors You Should Check During Site Selection for Reservoirs and Dam While Surveying.

The hydroelectric project is the most used method to generate electricity all over the world.Dams or reservoirs are the structures which

## What is Run off-Types,Factors,Effects and Definition in Water Cycle Engineering

You have at least once heard about runoff. But until now, you don’t know what does mean by runoff water, its types, effects and

## Gate Irrigation and Hydrology PDF Notes

Gate Irrigation and Hydrology PDF Notes 11.Irrigation_Hydrology (CE) by www.ErForum.net

## Measurement of Evaporation Losses-Pan Measurement Method and other types

Determination of evaporation losses The measurement of evaporation losses can find out by using three methods pan measurement method, water budget

## Factors Affecting Evaporation losses and How it Occures?

What is Evaporation? Evaporation is the process in which liquid changes into a gaseous state at boiling point is known

## Determination of irrigation requirement of crops

Consumptive Use or Evapotranspiration Irrigation requirement of crops depends upon the total amount of water used by the plant in

## Intensity of Irrigation-Gross and Culturable Commanded Area of Cropping

Cropping Intensity of Irrigation purposes The intensity of irrigation is the percentage of the culturable commanded area proposed to be

## Irrigation Efficiency-Efficiency in Irrigation

Irrigation efficiency Irrigation Efficiency is the ratio of the water Output to the water Input –usually expressed as percentage.They depends